The Separ EVO-10 filter is a lightweight, toolless change filter suitable for trucks and generators, based on the ultra successful SWK2000/10 filter it’s constructed from lightweight PA6 plastic, rather than aluminium.
Available in 10 and 30 micron paper, or 60 micron stainless steel, these efficient elements are your primary filtration friend!
Range Overview:
High separation efficiency with minimal pressure drop
Easy to install
Service and environment friendly
Optional heater and/or water sensor
Compact design with minimal weight
Suction side filtration
Fit an EVO, join the filter EVOlution!
This range is an effective system for the separation of water and particulate from fuel. This is vital as both water and particulate matter can result in high wear and tear of fuel pumps and injectors, resulting in reduced reliability and expensive engine repairs.
How Does it Work?
- Fuel inlet
- Rotational motion is induced in the fuel, while passing through the internal centrifugal chamber
- The fuel exits the centrifuge system and enters the filter bowl
- Due to the rotational energy, water and particulates separate from the fuel and settle at the bottom of the bowl
- The fuel is guided to the vane separation chamber
- The large cross section of the pre-chamber results in the fuel flow velocity being reduced allowing more particulate separation
- Suspended particulates and the finest water droplets are caught in the pleated media of the filter element
- The cleaned fuel passes to the outlet chamber
- Fuel outlet
