VK-2000/5U Vacuum Gauge for SWK2000/5U and SWK2000/5/50U duplex filters

VK-2000/5U Vacuum Gauge for SWK2000/5U and SWK2000/5/50U duplex filters

Vacuum Gauge Kit

  • Description

Description

When do you need to change the element inside your Separ filter? One way to tell is via your engine, if the filter is becoming full you may experience a limited rev range. However a much more efficient way to tell is to use a vacuum gauge kit. These are available for the Separ duplex range of filters and monitor the output port of the device. When the vacuum reaches a high level, the user can then simply swap to the clean side of the duplex, thus allowing the dirty side to be serviced. As the vacuum gauge is on the filter output, it will monitor the active filter at all times. There are two needles on the gauge, one is adjustable and the other gives the live reading. We recommend setting the adjustable one to the restriction when your filter is first used (the clean restriction value), then the live reading needle will slowly increase from that point. As this happens a true differential reading can be taken by comparing the position of the two needles.
For use with the SWK2000/5U and SWK2000/5/50U duplex units.

SKU: VK-2000/5U Categories: ,