WASP W-20/25 Range
A newly designed primary fuel filter/water separator providing protection from damaging water and particulate commonly found in diesel fuel.
Description
WASP Fuel Filters offer a new cost effective range of primary filtration equipment for Marine, Industrial and Transport applications.
The problems that can occur due to water and sediment in fuel are well known and WASP Filters offer a wide choice of options to cover most requirements.
Available with either a clear plastic bowl or metal bowl and brass drain valve
1. Separation:
The incoming flow of fuel oil changes velocity and direction, reducing the possibility of further reduction of any water droplets present through impact.
2. Coalescence:
This takes place on and just below the flow dispersion member allowing the separated water to descend to the bottom of the filter bowl.
3. Filtration:
The fuel finally passes through the stainless steel filter element. This removes all particulate above 100 micron still suspended in the fuel after the separation process.
Features
- 3/8'' BSP connection
- Plastic or metal bowls
- 120 - 150 litres per hour flow rate
- Lightweight
- Compact
- Choice of separators, paper elements or long life stainless steel
- LM6 grade aluminium filter heads with reversible stainless steel bracket & bolts
- Powder coated aluminium filter heads for corrosion prevention & long service life
Product Options
|
W-20F
|
Diesel Filter/Separator, clear plastic bowl
|
|
W-20FM
|
Diesel Filter/Separator, metal bowl
|
|
W-25WS
|
Diesel Water Separator, clear plastic bowl
|
|
W-25WSM
|
Diesel Water Separator, metal bowl
|
|
W-25ST
|
Diesel Filter/Separator, clear plastic bowl
|
|
W-25STM
|
Diesel Filter/ Separator, metal bowl
|
WASP W20 Specifications
| Model |
Flow (L/h)
|
Port Size
|
Element
|
Size
|
Weight
|
| W-20F |
150
|
3/8'' bsp
|
Paper
|
100 x 100 x 200mm
|
0.54kg
|
| W-20FM |
150
|
3/8'' bsp
|
Paper
|
100 x 100 x 200mm
|
0.8kg
|
| W-25WS |
120
|
3/8'' bsp
|
|
100 x 100 x 200mm
|
0.54kg
|
| W-25WSM |
120
|
3/8'' bsp
|
|
100 x 100 x 200mm
|
0.8kg
|
| W-25ST |
150
|
3/8'' bsp
|
Steel
|
100 x 100 x 200mm
|
0.54kg
|
| W-25STM |
150
|
3/8'' bsp
|
Steel
|
100 x 100 x 200mm
|
0.8kg
|
Paper filter elements are 20 micron, Steel filter elements are 150 micron stainless steel.
Water separation efficiency all models greater than 97%
Bowl capacities:
- W-20 & 25 Series with cone fitted - 100ml
- W-20 & 25 Series with element fitted - 75ml
A full range of fittings is available for easy installation.
Installation
- If necessary refit the two port plugs supplied with the filter. If they are not to be repositioned check they are correctly tightened.
- Follow the flow direction according to the arrows on each of the four ports.
- This range of filters should be installed on the suction side of the fuel supply system before the lift pump.
Maintenance
- Check regularly for separated water
- Drain off any separated water or impurities regularly via the thumb screw drain plug or valve
- Remove clean and re-fit the stainless steel element as necessary